From First Call to Final Report

It starts with a conversation. Tell us about your operation — field sizes, crop types, what you're trying to treat or accomplish. We'll ask the right questions and give you a straight answer on what we can do and what it'll cost.

• Phone or on-site consultation
• Field size & crop type assessment
• Service recommendation
• Transparent pricing estimate

Before we fly, we do our homework. We review your field boundaries, identify obstacles, check airspace, and build a precision flight plan. If needed, we'll walk the field with you to confirm conditions.

• Field boundary mapping
• Obstacle & airspace review
• GPS flight path generation
• Weather & wind assessment

On the day of the job, we arrive with the DJI T100 fully prepped. Check weather conditions and make sure it is ok to fly.  Then the tank is loaded with your product, nozzles are calibrated for the correct application rate, and the drone is checked top to bottom before the first pass.

• DJI T100 pre-flight inspection
• Product loading & tank calibration
• Nozzle rate verification
• GPS signal confirmation

The T100 flies the planned route autonomously, maintaining consistent altitude and speed for uniform coverage. Our operator monitors every pass in real time, ready to adjust for wind, obstacles, or field conditions.

• Autonomous GPS-guided flight
• Real-time operator monitoring
• Consistent altitude & speed
• Up to 40 acres per hour

After the final pass, we walk the field to verify coverage and check for any missed areas. Equipment is cleaned and rinsed on-site. You're never left with a mess or a question mark.

• Post-application field walk
• Coverage verification
• On-site equipment rinse
• Any re-passes if needed

You receive a full application report — acres covered, product applied, flight logs, and GPS maps. We follow up to make sure everything performed as expected and answer any questions.

• Detailed application report
• GPS flight log & maps
• Product usage documentation
• Follow-up check-in